87112015Unit: pieceHeading 8711

Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars › With internal combustion piston engine of a cylinder capacity exceeding 50 cc but not exceeding 250 cc: › Completely Knocked Down: › Other motorcycles (with or without side-cars), including motor scooters:

HS code 87112015Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc

Updated Jul 30, 2026 · Vietnam’s 2026 tariff schedule

This HS code covers motorcycles and motor scooters imported in a Completely Knocked Down (CKD) state, featuring an internal combustion piston engine with a cylinder capacity exceeding 200 cc but not exceeding 250 cc. Under Vietnam’s 2026 tariff schedule: a preferential (MFN) import duty of 75%, VAT of 10/8 and measured in “piece”.

Preferential (MFN) import duty
75
VAT
10%
Ordinary rate (non-MFN)
112.5
Unit of quantity
piece

What is HS code 87112015?

These goods fall under Heading 8711, which encompasses all types of motorcycles and cycles with auxiliary motors, including those with side-cars. Specifically, this classification applies to vehicles with an internal combustion piston engine whose displacement is greater than 200 cubic centimeters but not more than 250 cubic centimeters, and are imported as unassembled components.

Accurate classification for these motorcycles hinges on verifying both the engine's precise cylinder capacity and confirming their status as Completely Knocked Down (CKD) units. Importers should provide detailed technical specifications, engine displacement certifications, and documentation proving the unassembled nature of the goods to avoid misclassification with fully assembled vehicles or those with different engine sizes.

Specialised management for code 87112015

This product is subject to a special management policy

reviewed 2026-08-16

In force

  • Appendix II 08/2023/TT-BCTListed at group level 8711In force until 2026-09-05

    Temporary suspension of re-export / transhipment trade · Ministry of Industry and Trade

    The appendix lists the whole 8711 group, not this code specifically — check the product description to see whether it is covered.

    Shipments cleared from 2026-09-05 must be checked against 41/2026/TT-BCT.

  • Appendix I — high risk 49/2026/TT-BXDListed at group level 8711

    Technical-safety and environmental-protection quality certification · Ministry of Construction · replaces Appendix I 12/2022/TT-BGTVT

    The appendix lists the whole 8711 group, not this code specifically — check the product description to see whether it is covered.

Not yet in force

  • Appendix II — used goods 41/2026/TT-BCTListed at group level 8711In force from 2026-09-05

    Temporary suspension of re-export / transhipment trade · Ministry of Industry and Trade · replaces Appendix II 08/2023/TT-BCT

    The appendix lists the whole 8711 group, not this code specifically — check the product description to see whether it is covered.

    Applies to shipments cleared from 2026-09-05.

No longer in force — historical reference only
  • Appendix I 12/2022/TT-BGTVTListed at group level 8711Ceased 2026-07-01

    Technical-safety and environmental-protection quality certification · Ministry of Transport

    The appendix lists the whole 8711 group, not this code specifically — check the product description to see whether it is covered.

    Not a basis for new shipments; kept for reconciling filings made before 2026-07-01.

    Replaced by Appendix I — high risk 49/2026/TT-BXD, shown under the in-force group.

Checked against 50 lists reviewed on 2026-08-16 — other specialised management lists may exist that are not yet covered here.

What you have to do

Verbatim note from the 2026 tariff schedule

HH NK phải làm thủ tục HQ tại CK nhập (23/2019/QĐ-TTg); Phương tiện QSD cấp NK (08/2023/TT-BCT - PL1.II); HH tạm ngừng KD TNTX CK (08/2023/TT-BCT - PL2); HHNK phải chứng nhận trước khi thông quan (12/2022/TT-BGTVT PL1); Chứng nhận chất lượng ATKT và BVMT trước TQ (12/2022/TT-BGTVT và 62/2024/TT-BGTVT)

This note cites 12/2022/TT-BGTVT, 62/2024/TT-BGTVT — replaced by 49/2026/TT-BXD on 2026-07-01.

Article 6.3 of Circular 49/2026/TT-BXD repeals both Circular 12/2022/TT-BGTVT and Circular 62/2024/TT-BGTVT. The successor lists are split by medium and high risk level, no longer by whether certification happens before or after customs clearance.

View 49/2026/TT-BXD

This note cites 08/2023/TT-BCT - PL2 — will be replaced by 41/2026/TT-BCT on 2026-09-05.

Circular 41/2026/TT-BCT repeals Article 1.2 and Appendix II of Circular 08/2023/TT-BCT and issues a new suspension list applicable until 2029-12-31; the same day, Decree 292/2026/ND-CP replaces Decree 69/2018/ND-CP. Appendix I of Circular 08/2023/TT-BCT (used goods prohibited from import) is NOT repealed.

View 41/2026/TT-BCT

Abbreviations: HH = goods · NK = import · HQ = customs · QSD = used (second-hand) · PL = appendix · KD = trading · TNTX CK = temporary import for re-export and transhipment · ATKT = technical safety · BVMT = environmental protection · TQ = customs clearance

Reference only — exact procedures vary by product; confirm with the managing authority or an Avenir specialist.

Basic duties for HS code 87112015

Ordinary rate (non-MFN)
112.5
Preferential (MFN) import duty
75
VAT
10%
Export duty
-
Special consumption tax (SCT)
20
Environmental protection tax
-

VAT: Not eligible for the reduction - stays at 10% under Decree 174/2025/NĐ-CP.

Not sure HS code 87112015 is the right one for your shipment?

Send the code plus a product description and an Avenir specialist reviews it free, same day.

Special FTA preferential duties (2026)

How to claim: The rates below apply when the shipment carries a valid certificate of origin (Form D for ATIGA, Form E for ACFTA, EUR.1/REX for EVFTA, etc.).

Explore each agreement & C/O form →

Import-duty saving opportunity
MFN duty 75%drops to 0% under ATIGA (ASEAN)

A 75% gap - illustrated on a 100,000 USD shipment, that is roughly 75,000 USD saved in import duty.

But only if the shipment has a valid C/O and meets the rules of origin (RVC/CTC, etc.). The wrong C/O form or an RVC shortfall → duty reassessment and penalties at a post-clearance audit.

* The amount is illustrative only, not a commitment. The % gap comes from Vietnam’s 2026 tariff schedule; the preference actually granted depends on each shipment’s rules of origin.

Landed-cost calculator for HS code 87112015

Import cost calculator
10%Not reduced - stays 10% (Decree 174/2025/NĐ-CP)
This item may be subject to excise/environmental tax - enter the amount if known to include it.

Frequently asked questions about HS code 87112015

What is Vietnam’s import duty for HS code 87112015 (Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc)?
HS code 87112015 carries a preferential (MFN) import duty of 75%, an ordinary rate (non-MFN) of 112.5% and VAT of 10/8 under Vietnam’s 2026 tariff schedule. Additionally, a special consumption tax (SCT) of 20% applies.
What is the VAT rate for HS code 87112015?
HS code 87112015 (Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc) is subject to value-added tax (VAT) of 10/8 under Vietnam’s 2026 tariff schedule. VAT is charged on the taxable value, which includes import duty, so any change in import duty also changes the VAT payable.
Does importing HS code 87112015 require an import permit?
HS code 87112015 (Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc) is subject to a special management policy Appendix II — used goods 41/2026/TT-BCT applies from 2026-09-05.: HH NK phải làm thủ tục HQ tại CK nhập (23/2019/QĐ-TTg); Phương tiện QSD cấp NK (08/2023/TT-BCT - PL1.II); HH tạm ngừng KD TNTX CK (08/2023/TT-BCT - PL2); HHNK phải chứng nhận trước khi thông quan (12/2022/TT-BGTVT PL1); Chứng nhận chất lượng ATKT và BVMT trước TQ (12/2022/TT-BGTVT và 62/2024/TT-BGTVT) ⚠️ 12/2022/TT-BGTVT and 62/2024/TT-BGTVT were replaced by 49/2026/TT-BXD on 2026-07-01. Article 6.3 of Circular 49/2026/TT-BXD repeals both Circular 12/2022/TT-BGTVT and Circular 62/2024/TT-BGTVT. The successor lists are split by medium and high risk level, no longer by whether certification happens before or after customs clearance. Reviewed 2026-08-16. ⚠️ 08/2023/TT-BCT - PL2 will be replaced by 41/2026/TT-BCT on 2026-09-05. Circular 41/2026/TT-BCT repeals Article 1.2 and Appendix II of Circular 08/2023/TT-BCT and issues a new suspension list applicable until 2029-12-31; the same day, Decree 292/2026/ND-CP replaces Decree 69/2018/ND-CP. Appendix I of Circular 08/2023/TT-BCT (used goods prohibited from import) is NOT repealed. Reviewed 2026-08-16. Abbreviations: HH = goods · NK = import · HQ = customs · QSD = used (second-hand) · PL = appendix · KD = trading · TNTX CK = temporary import for re-export and transhipment · ATKT = technical safety · BVMT = environmental protection · TQ = customs clearance. Contact Avenir for support with the procedure.
Does HS code 87112015 require specialized inspection or conformity certification?
Yes. HS code 87112015 (Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc) is subject to technical safety and environmental registration, carried out by the Vietnam Register (Ministry of Transport). This runs in parallel with the customs declaration - missing paperwork holds the goods at the port, so it must be prepared before the shipment arrives.
Which FTA preferences apply to HS code 87112015?
The lowest preferential rate for HS code 87112015 is 0%, available under the following agreements: ATIGA (ASEAN) and Vietnam – Laos. To claim this rate the shipment needs a valid certificate of origin (C/O) for the relevant agreement (Form D for ATIGA, Form E for ACFTA, EUR.1/REX for EVFTA, etc.).
Does importing HS code 87112015 require a certificate of origin (C/O), and which form?
Yes, to claim the special preferential duty. HS code 87112015 has preferences under ATIGA (ASEAN) and Vietnam – Laos; each agreement uses its own C/O form, issued by the competent authority of the exporting country - see the corresponding agreement page for the right form, issuing body and legal basis. Without a valid C/O the shipment is taxed at the MFN rate.
What is the unit of quantity for HS code 87112015?
The unit of quantity for HS code 87112015 is piece.
What goods does HS code 87112015 cover?
HS code 87112015 covers goods described as “Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc”. In Vietnam’s tariff schedule, this code falls under: Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars → With internal combustion piston engine of a cylinder capacity exceeding 50 cc but not exceeding 250 cc: → Completely Knocked Down: → Other motorcycles (with or without side-cars), including motor scooters: → Of a cylinder capacity exceeding 200 cc but not exceeding 250 cc. The tariff description is legally binding - the actual goods must match both this description and the chapter notes, so two items that sound alike can still take different codes.

Related HS codes (heading 8711)

Showing the first 12 codes in heading 8711. See all of heading 8711

Getting ready to import this product?

See the full import procedure, duties and permits for Auto Parts.

Import procedure for Auto Parts

Avenir Logistics

Free review of HS code 87112015 + a quote for the procedure

Send the HS code and a shipment description; the Avenir customs declaration team reviews it and quotes the whole procedure, free of charge.

Duty data is for reference and follows Vietnam’s 2026 tariff schedule in force. Please check the original Ministry of Finance texts or contact Avenir before relying on it.