41/2026/TT-BXDAppendix IIIn force · from 2026-07-01

High-risk construction materials requiring certification and declaration

Goods in Appendix II of 41/2026/TT-BXD: Obtain conformity certification from a body DESIGNATED BY THE MINISTRY OF CONSTRUCTION (PT2, PT5 or PT7), register for state inspection of imports, then declare conformity through the national database. 9 goods lines, transcribed verbatim from the appendix. 41/2026/TT-BXD has been in force since 2026-07-01.

Quality management of construction-material products and goods. Issued by Ministry of Construction, in force from 2026-07-01.

Reviewed 2026-08-069/9 lines carry an HS codeView the source instrumentAll lists
Lines in appendix
99 carry an HS code
Effective from
2026-07-01In force
Obligation
Certification + declarationReplaces 10/2024/TT-BXD

In short

What to do if your goods fall in Appendix II

Obtain conformity certification from a body DESIGNATED BY THE MINISTRY OF CONSTRUCTION (PT2, PT5 or PT7), register for state inspection of imports, then declare conformity through the national database.

  1. Obtain conformity certification from a body DESIGNATED by the Ministry of Construction, under scheme PT2, PT5 or PT7 as shown in the appendix’s last column (referring to Circular 14/2026/TT-BKHCN of 2026-04-09). Register for state quality inspection of imports with the Department of Construction (Article 8.2(b) — high-risk group only). File the declaration of conformity through the National Database on Standards, Metrology and Quality; only if that database fails or is incomplete may it be filed in person or by post with the inspection body (Article 12.5). — The Department of Construction (inspection body) receives state-inspection registrations; the Ministry of Construction designates conformity-assessment bodies (Article 14). The specialist unit inside the ministry is the Department of Science, Technology, Environment and Construction Materials.

HS code list

9 lines of Appendix II, transcribed verbatim

Transcribed verbatim in the order of the appendix. A line with no code is a heading row — this page does not assign codes. Select a code to open the full HS lookup.

Showing 9/9 rows
HS codeGoods
PT2, PT7
2524.90.00Amiăng trắng
2618.00.002621.90.90Xỉ hạt: - Xỉ hạt lò cao; - Xỉ hạt phốt pho lò điện nghiền mịn dùng cho xi măng và bê tông.**
2621.90.90Tro bay dùng cho vật liệu xây dựng: - Phụ gia hoạt tính tro bay dùng cho bê tông, vữa xây và xi măng; - Tro bay làm nguyên liệu sản xuất vật liệu xây dựng.
2620.99.902621.90.90Tro xỉ nhiệt điện đốt than làm vật liệu san lấp**
2619.00.00Xỉ thép làm vật liệu san lấp**
3825.69.00Hỗn hợp thạch cao phốt pho làm vật liệu san lấp**
3824.40.00Thạch cao phospho dùng để sản xuất xi măng
PT2, PT5, PT7
6809.11.006809.19.906809.90.903 codesTấm thạch cao, Panel thạch cao cốt sợi, panel thạch cao sợi thủy tinh
7005.10.907005.21.907005.29.207005.29.907007.19.907007.29.907008.00.007 codesKính xây dựng: - Kính nổi; - Kính phủ phản quang; - Kính phủ bức xạ thấp (Low E); - Kính phẳng tôi nhiệt; - Kính dán nhiều lớp và kính dán an toàn nhiều lớp; - Kính hộp gắn kín cách nhiệt.

Source: Appendix II, 41/2026/TT-BXD. Reviewed 2026-08-06. View the source instrument

Scope & how to read the table

What decides whether your goods are in it

Article 12.2(a): "For high-risk products and goods, declaration of conformity rests on certification results from a certification body DESIGNATED BY THE MINISTRY OF CONSTRUCTION" — narrower even than Circular 10/2024, which also allowed bodies merely registered in the field. Article 8.2(b) limits state inspection of imports to the high-risk group only, so that obligation does not reach Appendix III. Appendix note **: for slag, ash and waste-gypsum lines, "import follows the law on environmental protection". The appendix no longer carries a pre/post-clearance column — that timing now sits in Articles 82–83 of Decree 37/2026/ND-CP.

What being absent from this list does not mean

This appendix is one of many specialised-management lists. Goods absent from it may still fall under another ministry's list, or be controlled on other conditions. This page does not replace a full check before filing.

Validity & transition

Validity milestones for this list

  1. Before 2026-07-01

    Certificates issued before 2026-07-01 remain valid until expiry

    Article 17: standard- and regulation-conformity certificates under QCVN 16:2023/BXD issued before 2026-07-01 remain valid until their stated expiry; designated bodies continue operating within their designated scope and term. Article 17.3: products under QCVN 16:2023/BXD that are NOT in Appendix II or III are managed as LOW risk. Products in Appendix II or III with no corresponding QCVN yet declare an applied standard until one exists. ⚠️ The circular has NO provision for consignments that completed export or import formalities before 2026-07-01 — the equivalent clause in Article 20.2 of Circular 10/2024/TT-BXD has disappeared.

  2. 2026-07-01

    41/2026/TT-BXD takes effect

    The list starts to apply on this date. 10/2024/TT-BXD is repealed.

Responsible authorityThe Department of Construction (inspection body) receives state-inspection registrations; the Ministry of Construction designates conformity-assessment bodies (Article 14). The specialist unit inside the ministry is the Department of Science, Technology, Environment and Construction Materials.

FAQ

Frequently asked questions about Appendix II 41/2026/TT-BXD

Which goods does Appendix II of 41/2026/TT-BXD cover?
Appendix II — the list of HIGH-risk construction-material products and goods, 9 lines at 8-digit level: white asbestos, waste slag and ash used as admixtures, phosphogypsum for cement production, and construction glass of all kinds. The list replaces the "group 2" framework of Circular 10/2024/TT-BXD with risk-level classification. The product names and HS codes in Appendices II and III replace Table 1 of QCVN 16:2023/BXD. Appendix I of the circular is a classification tree with no HS codes; Appendix IV is a reporting form.
How do I tell whether my goods fall in Appendix II of 41/2026/TT-BXD?
Article 12.2(a): "For high-risk products and goods, declaration of conformity rests on certification results from a certification body DESIGNATED BY THE MINISTRY OF CONSTRUCTION" — narrower even than Circular 10/2024, which also allowed bodies merely registered in the field. Article 8.2(b) limits state inspection of imports to the high-risk group only, so that obligation does not reach Appendix III. Appendix note **: for slag, ash and waste-gypsum lines, "import follows the law on environmental protection". The appendix no longer carries a pre/post-clearance column — that timing now sits in Articles 82–83 of Decree 37/2026/ND-CP.
What does conformity certification and declaration involve?
1. Obtain conformity certification from a body DESIGNATED by the Ministry of Construction, under scheme PT2, PT5 or PT7 as shown in the appendix’s last column (referring to Circular 14/2026/TT-BKHCN of 2026-04-09). Register for state quality inspection of imports with the Department of Construction (Article 8.2(b) — high-risk group only). File the declaration of conformity through the National Database on Standards, Metrology and Quality; only if that database fails or is incomplete may it be filed in person or by post with the inspection body (Article 12.5). — The Department of Construction (inspection body) receives state-inspection registrations; the Ministry of Construction designates conformity-assessment bodies (Article 14). The specialist unit inside the ministry is the Department of Science, Technology, Environment and Construction Materials.
When did 41/2026/TT-BXD take effect, and has it been amended?
Effective from 2026-07-01. Data on this page reviewed 2026-08-06.

Related lists

Usually checked at the same time

41/2026/TT-BXDIn force11 lines
Appendix III
Same circular · Declaration of conformity
10/2024/TT-BXDNo longer in force45 lines
Appendix II
Predecessor list · Certification + declaration
29/2025/TT-BKHCNNo longer in force62 lines
Appendix I
Same obligation · Certification + declaration
36/2026/TT-BKHCNIn force133 lines
Appendix I — high risk
Same obligation · Certification + declaration

Tools to use alongside

HS code lookup
Find 8-digit HS codes with duty rates and management policy
Import tax calculator
Import duty, VAT, excise tax and FTA preferences by HS code
Document cross-check
Cross-check invoice, packing list and B/L before declaring
Chemical SDS reader
Extract composition and hazard classification from an SDS file
Not sure about your consignment

Send us the HS code and the goods description — we will check it against the list

The Avenir declaration team checks codes against the real document set and replies within the working day.

This page summarises and quotes Appendix II of 41/2026/TT-BXD, reviewed 2026-08-06. The HS table is transcribed verbatim from the appendix — not normalised, and no codes are inferred. This is not legal advice: for a specific consignment, check against the original text and the view of the customs office handling it.

Certification + declaration
from 2026-07-01